Blowing Fuses on 2165

   / Blowing Fuses on 2165 #1  

Ottodrome

New member
Joined
Nov 8, 2004
Messages
5
I have a 2165 that has been working great. All of a sudden I started to blow the 20a fuse between the battery and ignition switch. It happens sometimes in the middle of snow blowing. It also happens when I shut the unit off and then try to re-start it.

Any ideas? I do know my ignition switch is a bit loose. Not sure what it could be.

Any help would be appreciated.
 
   / Blowing Fuses on 2165 #2  
I have a 2165 that has been working great. All of a sudden I started to blow the 20a fuse between the battery and ignition switch. It happens sometimes in the middle of snow blowing. It also happens when I shut the unit off and then try to re-start it.

Any ideas? I do know my ignition switch is a bit loose. Not sure what it could be.

Any help would be appreciated.

would look at connections to or the ignition switch itself as the culprit. A test light or VOM should help you isolate the short.
 
   / Blowing Fuses on 2165 #3  
would look at connections to or the ignition switch itself as the culprit. A test light or VOM should help you isolate the short.

Put a head lamp across the fuse holder. You may need a switch with fuse in series to get it started. Wiggle wires and connections and look for the light to get bright.
 
   / Blowing Fuses on 2165
  • Thread Starter
#4  
As it turns out it was the fuse holder wire itself. I changed it and problem solved.
 

Tractor & Equipment Auctions

UNUSED FUTURE FT15J EXCAVATOR (A54756)
UNUSED FUTURE...
1983 Case 580D (A47477)
1983 Case 580D...
(75) 2" X 2" X 8' ANGLE IRON (A54756)
(75) 2" X 2" X 8'...
New Holland 316 Square Baler (A50775)
New Holland 316...
2012 MACK GU713 DUMP TRUCK (A51406)
2012 MACK GU713...
2013 Ford F-150 4x4 Crew Cab Pickup Truck (A53422)
2013 Ford F-150...
 
Top