Can you tell me how narrow the lower 3pt arms will come together on a 554 kama? I need to make a mod to a 3 pt trailer hitch and wonder if the thing is wide enough to mount on a Kama. I would need to have the amrs come to 24 inches at the eyes.
Bluechip
- Thread starter schmalts
- Start date
- Views: 827
bluechip
Veteran Member
I'll measure for you tomorrow and post the results.
bluechip
Veteran Member
From eye to eye I get about 23" inside between.
That is with the tie back in the last set of holes.
That is with the tie back in the last set of holes.
Thanks again, looks like it will work without wideing it.
I wonder if you know off the top of your head what the length of one of those 554 will be with a FEL, I need to get a truck rented to pick mine up next weekend when it comes and may end up getting a gargo box truck. I think a 25 foot will be good enough (i have 2 atv's also to haul) but want to make sure. I estimate the poundage with the loader to be around 6500?
I wonder if you know off the top of your head what the length of one of those 554 will be with a FEL, I need to get a truck rented to pick mine up next weekend when it comes and may end up getting a gargo box truck. I think a 25 foot will be good enough (i have 2 atv's also to haul) but want to make sure. I estimate the poundage with the loader to be around 6500?
bluechip
Veteran Member
I don't remember right offhand but I'm thinking about 14-16' is all the tractor/loader will need.
