John1306
New member
I have a 2012 Bobcat S185 Skid Steer with a deluxe panel.
The entire electrical system is very erratic. The battery cables or the fuse box relays must be used as a switch to energize or shut down the electrical system. In other words, I have no control of the power to the machine using the start/stop keypad. When the machine is powered up by using this method, the left hand display reads: M3404 and all the lights come on by themselves and most warning lights on left hand panel are flashing.
Any help you can give me on this would be much appreciated.
Thanks,
JK
The entire electrical system is very erratic. The battery cables or the fuse box relays must be used as a switch to energize or shut down the electrical system. In other words, I have no control of the power to the machine using the start/stop keypad. When the machine is powered up by using this method, the left hand display reads: M3404 and all the lights come on by themselves and most warning lights on left hand panel are flashing.
Any help you can give me on this would be much appreciated.
Thanks,
JK
