Bobcat T770 door sensor issue

[Xfaxman]

I am thinking to bypass the misaligned striker, we can place a magnet next to the sensor.

Why can't you align the striker?

 

[rbrown225]

 

[rbrown225]

I don't have the schematic for the forestry door but this shows the standard door wiring. So at least you know where to start.

 

[LittleBill21]

guys this is simple, if your understanding the liability, then simply take the sensor off the door, and make it activate.

if it requires a magnet, then simply buy a magnet, and zip tie it to the sensor, if its a pin zip tie the pin down. no need to cut wiring or do anything magical.

remember KISS