Jul 27, 2013 / Bouncing three point Thread Starter #11 OP M mailman02 New member Joined Jul 26, 2013 Messages 8 Location Carthage MO Tractor ih What do you mean by on? Is it lever position? I usually run it in the down position as I have always done.
What do you mean by on? Is it lever position? I usually run it in the down position as I have always done.
Jul 27, 2013 / Bouncing three point #12 murphy1244 Super Star Member Joined Nov 25, 2011 Messages 16,321 Location Ohio Tractor Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y It seems your draft is stuck on.imo
Jul 27, 2013 / Bouncing three point #13 B Brad_Blazer Veteran Member Joined Aug 19, 2004 Messages 1,871 Location Caldwell Co. NC Tractor 2006 Kama554; 92 Belarus 250AS The cylinder seal may be shot causing it to constantly drift down and correct itself.
Jul 27, 2013 / Bouncing three point #14 murphy1244 Super Star Member Joined Nov 25, 2011 Messages 16,321 Location Ohio Tractor Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y How old is this machine?
Jul 27, 2013 / Bouncing three point Thread Starter #15 OP M mailman02 New member Joined Jul 26, 2013 Messages 8 Location Carthage MO Tractor ih 12-13yrs old
Jul 27, 2013 / Bouncing three point #16 murphy1244 Super Star Member Joined Nov 25, 2011 Messages 16,321 Location Ohio Tractor Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y raise 3 point with cutter on shut down tractor and post amount of time it takes to fall. Brad may be on to something
raise 3 point with cutter on shut down tractor and post amount of time it takes to fall. Brad may be on to something
Jul 27, 2013 / Bouncing three point Thread Starter #17 OP M mailman02 New member Joined Jul 26, 2013 Messages 8 Location Carthage MO Tractor ih I will give that a try. Either cylinder seal or maybe in the valve?
Jul 27, 2013 / Bouncing three point #18 TomSeller Super Member Joined Jan 5, 2013 Messages 8,379 Location . Tractor JD, Massey, Kubota, Case Do you have somewhere to hook a chain up in place of the top link that does not pull on the draft sensing built into the normal top link mounting pin? Somewhere solid on the tractor. That would tell you if it is the draft control or not.
Do you have somewhere to hook a chain up in place of the top link that does not pull on the draft sensing built into the normal top link mounting pin? Somewhere solid on the tractor. That would tell you if it is the draft control or not.