PineRidge
Super Member
I would take that nasty top link off and add top & tilt. Works best with a box blade anyway. /forums/images/graemlins/wink.gif
box blade adjustment?
- Thread starter WiJC
- Start date
- Views: 2388
Laminarman
Gold Member
In response to loosening agents, try PB Blaster, much better than WD40 at loosening stuff. Better penetration. Available at NAPA auto parts and other hardware places.
out of curiosity...what would a top n tilt run me?
..as it turns out all i needed to do was get that nut out of the way. the way everything was painted and lined up...i had to get about 6" away from the darn thing before i could actually tell it was a separate nut and not just all 1 piece.
thanks again for the info.
John
..as it turns out all i needed to do was get that nut out of the way. the way everything was painted and lined up...i had to get about 6" away from the darn thing before i could actually tell it was a separate nut and not just all 1 piece.
thanks again for the info.
John
MadReferee
Elite Member, Rest in Peace
- Joined
- Apr 28, 2003
- Messages
- 3,862
- Location
- New Hampshire
- Tractor
- Kubota B2710, IH TD6-62 dozer with Drott 4n1 bucket loader
<font color="red"> out of curiosity...what would a top n tilt run me?
</font> <font color="black">
A Terrain Contour Control (TCC) TNT setup from Integration Engineering would run you about $1200. Check out Integration Engineering . Several TBNers have them.
</font> <font color="black">
A Terrain Contour Control (TCC) TNT setup from Integration Engineering would run you about $1200. Check out Integration Engineering . Several TBNers have them.
