PaulT
Gold Member
I have the same boxblade, although I pull it with a Kubota 2710. It weighs about 470 lbs, so weight is not the issue. I think the top link is tilting the scarifier tips too far backwards, and the tips are pointing straight down (or closer to that) instead of forward and down (about a 45 degree angle). If the tips drag along, they won't dig in, really no matter how much weight you add on top of them. Do what someone else said, and tilt the bb back a few degrees. This will keep the scarifier tips tilted down and forward, and lift the front corners of the sides up and out of the way, letting the box go a little deeper into the soil. Unless you have kiln-fired hardpan clay with absolutely no mosture, this bb will dig in for you. With a 1710, you're more likely to stall it when its ripping than anything else. Good luck, and lengthen that top link just past halfway! /forums/images/graemlins/smile.gif