Have just started using a box blade, would like any helpful hints or tips to make learning faster. Just FYI: I have a Woods GB65 and so far I've used it to remove deep tire ruts in a field, smooth out the bottom and edges of a ditch, and spread a load of driveway rock.
Box Scraper box blade operating tips ?
- Thread starter Beavis
- Start date
- Views: 1403
jbrumberg
Elite Member
- Joined
- Jan 22, 2006
- Messages
- 4,903
- Location
- Cummington, MA
- Tractor
- New Holland TC29DA, John Deere D130
Beavis:
Sounds like you are doing alright already with your new boxblade
. Adjusting the top link to the needs of the task is the main challenge. Shortening the top link deepens scarifier penetration, transfers more weight to the front of the blade, and will raise the cutting edge for a more shallow cut. Lengthening the top link does the opposite. The more you use it the easier it becomes. Jay
Sounds like you are doing alright already with your new boxblade
. Adjusting the top link to the needs of the task is the main challenge. Shortening the top link deepens scarifier penetration, transfers more weight to the front of the blade, and will raise the cutting edge for a more shallow cut. Lengthening the top link does the opposite. The more you use it the easier it becomes. Jaychrisjbell
Platinum Member
- Joined
- Jul 17, 2000
- Messages
- 956
- Tractor
- Kubota B7300; JD LX233
Do a forum search (this is the right one) and you'll get pages and pages of advice on this subject...
Here are some similar links:
