Box Blade - Rollover
- Thread starter roysallis
- Start date
- Views: 3192
W5FL
Veteran Member
- Joined
- Apr 7, 2000
- Messages
- 1,558
- Location
- Central Texas
- Tractor
- TYM T-1104/TX10 Loader Kubota M6800SD/LA1002 Loader Kubota RTV900
I have a Woods brochure (they bought Gill) and I have seen one. Best feature is they can go from level to scarfier in a few seconds. Worse feature is that cost more than one that doesn't do this. They are also heavy and that IS good. /w3tcompact/icons/smile.gif
OP
roysallis
Gold Member
- Joined
- Apr 11, 2000
- Messages
- 265
- Location
- Alabama
- Tractor
- JD 5210, JD 521 Loader, JD MX6 Rotary Cutter, TufLine 6' Disk, TufLine 6' Grader Blade, TufLine 6' Box Blade
wen,
Thanks for the info. I will be looking at a used rollover blade this afternoon. The seller says that it has been kept inside and that it is a heavy blade. If Woods bought out Gill then maybe it is a good one. The asking price is lower than the cheap regular blades that I have looked at. Maybe I had better get this one.
Thanks again.
Thanks for the info. I will be looking at a used rollover blade this afternoon. The seller says that it has been kept inside and that it is a heavy blade. If Woods bought out Gill then maybe it is a good one. The asking price is lower than the cheap regular blades that I have looked at. Maybe I had better get this one.
Thanks again.
Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
Gill has been building rollover scrapers for many years and they are practically indestructible. Rollovers are typically heavier than a comparable width standard box scraper. For example, my Woods/Gill 60 inch rollover has a spec weight of 730 pounds. The standard Woods 60 inch box scraper shows a spec weight of about 460 pounds.
