newtractor
Member
Hey it me again with a new problem or perceived problem, like i said I'm new to tractors. After i got the tractor unstuck i noticed that there was damage to the muffler tailpipe section and also that the brake linkage was binding against a small tab of the fender that extends down by the muffler. I didn't discover this until i was pushing dirt back into the hole that i was stuck in when i noticed that the brake lights would not extinguish when the pedal were released. So after bending the fender out of the way and freeing the the linkage the light was still on. I then adjusted the brake light switch which was extremely tight this solve the light problem. But it seem that the tractor doesn't have much braking action...doesn't stop when brakes are applied but will slow down. Is this normal or should it stop when you apply the brakes. this has a dry brake system.
It could be with everything happening all together that it doesn't seem normal... been a long week somebody please tell me this is normal /forums/images/graemlins/confused.gif
It could be with everything happening all together that it doesn't seem normal... been a long week somebody please tell me this is normal /forums/images/graemlins/confused.gif