Break in period, Suggestions Kohler 23 V-Twin

   / Break in period, Suggestions Kohler 23 V-Twin #1  

Corvus

New member
Joined
Jun 4, 2005
Messages
4
Hi Folks,

Just wondering what type of break in routine I need to use for my new Z-Force 50. I understand I need to change the oil and filter after 5 hours of use . . . anything else . . .

Should I avoid long periods of full throttle, should I vary throttle speeds?

Anything to avoid durning the first hours of use?

thanks

Corvus the Crow
 
   / Break in period, Suggestions Kohler 23 V-Twin
  • Thread Starter
#2  
Oh and . . . there was an old school of thought that suggested you use an rag covered in WD40 to wipe down the frame and deck of you mower . . . instead of waxing it or anything . . . what do folks recommend to prevent rust and paint deterioration ?

thanks

/forums/images/graemlins/confused.gif
 
   / Break in period, Suggestions Kohler 23 V-Twin #3  
Just run it normally & change the engine oil & filter after 5-10hrs. There is no real way to vary the throttle while under use as you need full throttle for the mowing deck and hydro /forums/images/graemlins/confused.gif. WD40 is one heck of a cleaning agent, fairly good water repellant, not much of a lubricant. It works great to get adhesives, tar, & sticky gooey stuff off! It wont hurt your paint/finish at all.
G/luck
Joel
 
   / Break in period, Suggestions Kohler 23 V-Twin #4  
Check in the Owner's Manual. With the tractors (mine at least) there was a break in schedule for both the engine and the PTO clutch.

I would suspect the RZT would have the same ... but maybe not.

Ed
 

Tractor & Equipment Auctions

MCELROY COOL PACK 20 (A50854)
MCELROY COOL PACK...
John Deere Quick Attach Bale Spear (A50514)
John Deere Quick...
2016 LINK-BELT  235X3 SPIN ACE EXCAVATOR (A50854)
2016 LINK-BELT...
SET OF HANG ON WHEEL LOADER FORKS (A51242)
SET OF HANG ON...
2025 Swict 78in Bucket Skid Steer Attachment (A50322)
2025 Swict 78in...
2023 TAKEUCHI TL10V2 SKID STEER (A51242)
2023 TAKEUCHI...
 
Top