Broke the Joystick base on my loader

[Menagerie-Manor]

So I need to locate a new cast mag base for my Besko loader stick, anyone have a source.

 

[Torvy]

Y'all out of duct tape?

 

[Menagerie-Manor]

Y'all out of duct tape?

Unfortunately the base split in half, looks to be a Besko valve.

 

[Torvy]

Unfortunately the base split in half, looks to be a Besko valve.

Ah, so super glue, then. Between those 2 things anything can be fixed!

Sorry for your loss. Good luck in your search.

 

[Menagerie-Manor]

Looks like I'm gonna be sol on this part, Besko seems to be a very elusive, so probably be easier to swap in a new valve at this point.

 

[Harry in Ky]

Seems that certain Besko valve controls are of suspect quality. I think I've seen more than one complaint about broken linkage components.

Mahinder/Besko 2638L Loader Valve Repair

I have a Mahindra 2638 with a Besko hydraulic loader valve. I broke one of the linkage covers and could not find a placement ANYWHERE. Mahindra could only sell the entire Joystick (over$700). After calling 5 other parts distributors (including 2 Mahindra dealers), Sharla at Short Line Parts...

www.tractorforum.com

J2023H loader control lever

Anybody ever seen this issue on their LS? LS J2023H, bought in summer of 2014. I was snowblowing my driveway yesterday, went to lower the snowblower and the lever for lifting/lowering/angling the snowblower (or loader if thats installed) was just flopping around...like it was no longer...

www.tractorbynet.com

 

[duffer]

I'm one of the guys that had to replace my Besko loader valve because I lost a $.69 spring for the one of the spools. Tried to contact Besko directly, but that was futile. Didn't even get a "go-to-hell" back from them. Also contacted 5 different dealers, and nobody carried any parts (gee...there's a surprise)

Ended up buying a new replacement valve assembly from Surplus Center. Pretty happy with the replacement. People there are very helpful too if you need some advice.

Here's a link if you want to check them out:

Hydraulic Valves | Hydraulics | www.surpluscenter.com

Hydraulic Valves,Directional Control Valves,Log Splitter Valves,Joystick Valves,Solenoid Valves,Sectional Control Valves,Pilot Operated,Power Steering

www.surpluscenter.com

 

[Menagerie-Manor]

I'm one of the guys that had to replace my Besko loader valve because I lost a $.69 spring for the one of the spools. Tried to contact Besko directly, but that was futile. Didn't even get a "go-to-hell" back from them. Also contacted 5 different dealers, and nobody carried any parts (gee...there's a surprise)

Ended up buying a new replacement valve assembly from Surplus Center. Pretty happy with the replacement. People there are very helpful too if you need some advice.

Here's a link if you want to check them out:

Hydraulic Valves | Hydraulics | www.surpluscenter.com

Hydraulic Valves,Directional Control Valves,Log Splitter Valves,Joystick Valves,Solenoid Valves,Sectional Control Valves,Pilot Operated,Power Steering

www.surpluscenter.com

Yep, I was on that site earlier so will probably give them a call in the am to see what I can get asap.

 

[oldnslo]

Unfortunate reality might be that the part would be similar or higher price than new valve. I believe both Brand & Prince show a part number for their joy stick assemblies but would be pure chance if they had exact same mounting pattern.

 

[K5lwq]

Do you have the pieces that broke? Maybe take them to a machine shop and ask them to build you one. If it is the joystick mount I am thinking of it would not be that hard to build.