Afternoon everyone, I farm a little and use a small Massey Ferguson tractor for keeping deer food plots clipped and it sets most of the time it is a 1999 model and has 125 hrs so you can tell it is about wore out. Having a little trouble with the injector pump I assume, can't get fuel to the injectors so I thought I might get a little info or suggestions. Thanks
broken 231
- Thread starter larry dun
- Start date
- Views: 1021
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,840
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
G'day Mate and welcome to TBN from Downunder.
I suspect that Catherine will be along soon enough to shift your question over to the MF forum, where you'll receive plenty of helpful advice.
In the meantime, enjoy the site... you can also check out the 'Similar Threads' at the bottom of this page.
I suspect that Catherine will be along soon enough to shift your question over to the MF forum, where you'll receive plenty of helpful advice.
In the meantime, enjoy the site... you can also check out the 'Similar Threads' at the bottom of this page.
JSanders10
Silver Member
Why do you think it is the injector pumps?
Have you used the manual primer pump found on the right hand side of the engine block?
Did you recently change the fuel filter or run out of diesel?
Have you used the manual primer pump found on the right hand side of the engine block?
Did you recently change the fuel filter or run out of diesel?
TBN Support
TBN Support
- Joined
- Feb 4, 2015
- Messages
- 4,560
Welcome to the forum.
:welcome:
As Wagtail already mentioned, I'll be moving your thread over to the MF section to see if someone over there knows. I hope you find your answer!
:welcome:
As Wagtail already mentioned, I'll be moving your thread over to the MF section to see if someone over there knows. I hope you find your answer!
