broken center link

[ktm250rider]

I broke my upper center link on my 4510. Deere site shows a price of 150 for a new one. I had a guy that i worked with weld the swivel end back onto the threads but i broke it again and now Ive lost my weld contact. Anyone know of a good place to get a replacement thats a little cheaper than 150 bucks?

 

[Farmwithjunk]

TSC has decent ones. (Generics that about all dealers carry) for under $50.

 

[Bedlam]

Do you mean the link with the threads that goes from tractor to the implement?? They are not expensive at all from
http://www.agrisupplyco.com/

or this one
http://www.speeco.com/asp/display.asp?view=top&category=Forged+Top+Links

Is this what you mean by the upper link?

 

[ktm250rider]

yeah those are the ones. I had a brain fart when I first looked for them and didnt really find anything when I searched for center link. Top link came out much better. Found a couple on ebay too.

 

[sandman2234]

Make sure the next one is long enough...
I bought one from ebay, and it was too short for most of my implements. The guy I got my tractor from scrounged up a couple of JD ones, and let me have them. (Yahooo!!)
David from jax

 

[Bedlam]

A friend of mine bought one from a magazine and only paid 22 dollars, so they are out there. If you find a good price let us know. I have seen them used for projects also. Some even buy them just to cut the ball ends off to weld them to other things.
Here is one from Northern not sure about the shipping cost , and yes check the legnth
http://www.shop.com/op/~PTO_Toplink_151_3_45_Point,_Category_1-prod-5628833?gs=1
another idea. Ive delt with this company
http://www.unionfarmequip.com/store/linkage/3pointhitch.html

and 28 dollar one
http://cgi.ebay.com/TRACTOR-3-POINT...3577706QQihZ020QQcategoryZ11752QQcmdZViewItem