Bucket/boom cylinder packing

[al b]

One of my bucket cylinders on the Kubota L48 started leaking and I'm having a tough time finding a wrench to take out the gland nut. All the ones I see are for face holes on the gland nut, my holes are 1/4" and.on the outside of the gland nut. Any ideas?

 

[al b]

This is it.

 

[Bill Guenthner]

One of my bucket cylinders on the Kubota L48 started leaking and I'm having a tough time finding a wrench to take out the gland nut. All the ones I see are for face holes on the gland nut, my holes are 1/4" and.on the outside of the gland nut. Any ideas?

That's what dealers are for.

 

[dlctcg]

@al b - Look up a Hook Spanner Wrench

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[LD1]

Since its a hole....more technically it would be a "pin spanner"

A pipe wrench also works.

Easiest to break it loose while the cylinder is still installed on the machine. No better way to "hold" the cylinder than how its is mounted

 

[al b]

That's what I was thinking

 

[al b]

I would like something like a gland nut wrench that would catch both holes for a better grip but I can't find it.

 

[Topzide]

https://www.amazon.com/8MILELAKE-Ad...hvlocphy=&hvtargid=pla-4584138872261965&psc=1
This will work.

 

[al b]

https://www.amazon.com/8MILELAKE-Ad...hvlocphy=&hvtargid=pla-4584138872261965&psc=1
This will work.

Thanks but no thanks. Won't do business with them.

 

[LD1]

Thanks but no thanks. Won't do business with them.

You can do business wherever you want. It was a link to show you what is needed