Built a shooting bench

   / Built a shooting bench #1  

gsganzer

Elite Member
Joined
Jun 11, 2003
Messages
3,100
Location
Denton, TX
Tractor
L3800 w/FEL and BH77, BX 2200 w/FEL and MMM
I've been wanting a good shooting bench at my deer lease, so I built this with a 2" x 6" x 14ga purlin, 2" x 14ga square tube, 1 1/2" square tube (used on the pull bars) and 2" x 1/8" flat bar I had lying around. I built it with skids so I can drag it to different shooting distances.

I can post some dimensions or more photo's if anyone needs them. If you tweak some dimensions, I think it could be made from a single 25' stick of purlin and a 20' 2" square tube, plus the flat bar. The flat bar is used to cap open ends and as a bottom "pad" under the top, where the seat support welds to the underside of the top.

Shooting bench 2.jpg
Shooting bench 1.jpg
 
   / Built a shooting bench #4  
Nice, now box it up and ship it to me....:thumbsup:
 
   / Built a shooting bench #7  
I think gsganger has motivated several some bodies a must do project.
 
   / Built a shooting bench #8  
Looks pretty nice, but I wouldn't want to have to sit on that steel in cold weather!! lol

SR
 
   / Built a shooting bench #9  
And a bit bigger for my butt size.
 
   / Built a shooting bench #10  
Now that's nice gsganzer! . . . :thumbsup: I'm a little different I like standing/knelling, the just in case stuff.
 

Tractor & Equipment Auctions

NORSTAR SERVICE BED (A47001)
NORSTAR SERVICE...
1993 Ford Supply Truck (A47307)
1993 Ford Supply...
2008 INTERNATIONAL 5600I (A47001)
2008 INTERNATIONAL...
Avant 528 (A42021)
Avant 528 (A42021)
2011 Ford F-250 Super Duty Rawson Koenig Service Truck (A45336)
2011 Ford F-250...
2018 Harley-Davidson FLHTP Police Electra Glide Motorcycle (A45336)
2018...
 
Top