3-Point Hitch Bush Hog

[keppy]

Hi everyone, This is my first post. I have a 2005 B7510 that I bought new. I bought a used bush hog a few days ago. It's a King Kutter 48in. It works great except I am limited on lifting it to about 12in. high at the rear. The problem is with loading and unloading the wheel touches the ground and seems to be putting upward pressure on the bush hog. This unit was used prior on a JD. Will I have to purchase a different mount that will be lower so the spreader bars will have more travel ?
Open for suggestions, Thanks

 

[SSdoxie]

Adjust your top link shorter this will bring the rear of the cutter higher.

 

[mddorange]

:welcome:
To TBN Keepy. Dennis is right, to raise the back wheel higher, shorten the top link.

 

[keppy]

Simple fix. Thanks for the help.