jiminpa
Bronze Member
got a old 5' bushhog that needs a little tlc. it's homebuilt, so no tags on it.the stumpjumper is trashed, anyone id the brand so I can replace
it?
it?bushhog help!
- Thread starter jiminpa
- Start date
- Views: 969
bullbreaker
Elite Member
DN Equipment - DN Equipment
You can get with these folks , send them pic's they should have one in stock to replace it .
You can get with these folks , send them pic's they should have one in stock to replace it .
TractorGuy
Elite Member
- Joined
- Sep 15, 2013
- Messages
- 4,616
- Location
- N. FL
- Tractor
- John Deere 4410, John Deere 4120, Kubota LX3310 cab, John Deere F725 Front Mount Mower, Swisher 60" pull behind mower. John Deere 4310 CUT (sold), Ford New Holland 575E Cab Backhoe (sold).
Better see if you can get it apart before you order anything. After that you can measure shaft size and count splines to match it up.
Agri Suppy has the best prices I've seen on parts but shipping might be too high.
Agri Suppy has the best prices I've seen on parts but shipping might be too high.
MESSMAKER
Veteran Member
Looks like a pretty standard set up. A lot of the cheaper cutters use the same stump jumper. You might get lucky.
