BX 2200 brake problem

   / BX 2200 brake problem #1  

michaelfree

New member
Joined
Aug 8, 2002
Messages
5
Greetings
My brakes have been under-performing lately. When doing my 100 hour service I went to adjust them and discovered that a pin or bolt was missing from the right side end of the shaft that activates the brakes. The bolt (or pin) fastens the arm that activates the brake on the right wheel. Has anyone else had this dangerous problem? I havn't got to the dealer yet to discover what type of fastener it is ---but I hope it is not prone to gettng loose and dropping out.
First post --- great site-----good people ----gives a person hope for civilization and the human race.

michael
 
   / BX 2200 brake problem #2  
I haven't had that happen, but I did have the brake pedal return spring come off and get trapped in the top of the MMM around a spindle. Ruined the spring of course.

Jim
 
   / BX 2200 brake problem #3  
We have in excess of 100, ah it maybe 200 of them out and haven't seen any problems in that area yet. But we will be watching. It might be that we teach to use the hydro for braking that nobody has noticed it.
 
   / BX 2200 brake problem #4  
I'm pushing 100 hours and checked mine after first reading your post.
Everything seems good on mine.
Hope it was just a fluke.
 

Tractor & Equipment Auctions

2022 Bobcat E88 Excavator (RIDE AND DRIVE) (A50774)
2022 Bobcat E88...
24 Foot Wells Cargo Enclosed Trailer (A50324)
24 Foot Wells...
2020 KUBOTA RTV X1100C UTV (A51406)
2020 KUBOTA RTV...
1997 John Deere 690 Elc Excavator (A50514)
1997 John Deere...
30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2012 International Semi Truck (A50323)
2012 International...
 
Top