BX 2200 brake problem

   / BX 2200 brake problem #1  

michaelfree

New member
Joined
Aug 8, 2002
Messages
5
Greetings
My brakes have been under-performing lately. When doing my 100 hour service I went to adjust them and discovered that a pin or bolt was missing from the right side end of the shaft that activates the brakes. The bolt (or pin) fastens the arm that activates the brake on the right wheel. Has anyone else had this dangerous problem? I havn't got to the dealer yet to discover what type of fastener it is ---but I hope it is not prone to gettng loose and dropping out.
First post --- great site-----good people ----gives a person hope for civilization and the human race.

michael
 
   / BX 2200 brake problem #2  
I haven't had that happen, but I did have the brake pedal return spring come off and get trapped in the top of the MMM around a spindle. Ruined the spring of course.

Jim
 
   / BX 2200 brake problem #3  
We have in excess of 100, ah it maybe 200 of them out and haven't seen any problems in that area yet. But we will be watching. It might be that we teach to use the hydro for braking that nobody has noticed it.
 
   / BX 2200 brake problem #4  
I'm pushing 100 hours and checked mine after first reading your post.
Everything seems good on mine.
Hope it was just a fluke.
 

Tractor & Equipment Auctions

2014 Ford Flex SUV (A50324)
2014 Ford Flex SUV...
2010 Triple B Gooseneck Inclosed Car Trailer (A50514)
2010 Triple B...
2007 John Deere 4320 Cab 4wd (A51039)
2007 John Deere...
2007 INTERNATIONAL MA025 DAY CAB (A51219)
2007 INTERNATIONAL...
16ft Trailer (A50322)
16ft Trailer (A50322)
2021 Ford F-250 4x4 Ext. Cab Pickup Truck (A49461)
2021 Ford F-250...
 
Top