BX-25 3PH Question

/ BX-25 3PH Question #1  

Proletarian

Bronze Member
Joined
May 30, 2012
Messages
75
Location
North of Atlanta
Tractor
BX-25 / BX-1830
After I'm done installing my sprinkler system using my back hoe I plan to remove it and install my 3PH so I can run my King Kutter XB tiller. Is the 3PH hard to install? anything special I may need to know? special tools, etc.. Thanks in advance.
 
/ BX-25 3PH Question #2  
Not hard to do, just be sure to orient the lift arms correctly (they angle out) and have to be put on correctly (left and right sides).
 
/ BX-25 3PH Question #3  
Looking at your avatar, I think it will be very hard taking the backhoe off and replacing it with the three point and tiller. ;) And is that what the new BX25s look like? Welcome to the group.

Take Care,
Doug in SW IA
 
/ BX-25 3PH Question #4  
Easy, no tools...:thumbsup:
Putting implement on, need a 3/4" wrench and big adjustable.
 
/ BX-25 3PH Question
  • Thread Starter
#5  
thanks for the replies. Sadly I dont have the KX-91 digging monster anymore:( this crap economy slowed my business to a crawl and I had to sell it. was a sad day. the 3PH idea wouldent of worked anyway. :p
 
/ BX-25 3PH Question #7  
It's easy to install. The only thing that threw me for a loop was a shiny brass bracket. You only put that on, if you intend to attach the top link with no implement.
 
/ BX-25 3PH Question #8  
It's not that hard once you get the hang of it. If you run into any problems, be sure to let us know so we will be able to assist. :thumbsup:
 
/ BX-25 3PH Question #9  
As I posted on another thread. Taking the back hoe off is a breeze. Installing the 3 pt is not a problem, BUT putting the back hoe back on was a two hour project. I had it on a BX expanded dolly and had to finally use two floor jacks to get it situated on the lower hinges . The rest was easy
 
/ BX-25 3PH Question #10  
Check 6. Why two hours? why didn't you use the out riggers?
 
/ BX-25 3PH Question #11  
Check 6. Why two hours? why didn't you use the out riggers?

I tried everything BUT you make a point I did not use the outriggers, I substituted floor jacks ...... oh well that is the price of having too many birthdays
 

Marketplace Items

2010 Kenworth T3 Class 7 Flatbed, 4x2, w Tuck-Under Liftgate (A63118)
2010 Kenworth T3...
40' Shipping Container (A64047)
40' Shipping...
2003 International 4300 Flatbed Dump 571557 (A62613)
2003 International...
2012 FREIGHTLINER CASCADIA 125 6X4 T/ANDEM  SLEEPER TRUCK TRACTOR (A59911)
2012 FREIGHTLINER...
1998 Volvo VNL64T Sleeper Truck (A62679)
1998 Volvo VNL64T...
Ford 3910 Tractor w/ Great Bend Loader (A64047)
Ford 3910 Tractor...
 
Top