BX 25 weight
- Thread starter Smokey1
- Start date
- Views: 29502
Renob
Gold Member
Right around 1800 lbs.
MessickFarmEqu
Super Member
Tractor - 1600
backhoe - 700
loader - 400
= approx 2700 lbs.
backhoe - 700
loader - 400
= approx 2700 lbs.
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 13,325
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
Does anyone have a good chart of tractor weights and their common implements, preferably in a simple spreadsheet form?
/edit
especially CUTs w/ FEL and BH.
/edit
especially CUTs w/ FEL and BH.
Renob
Gold Member
Of course Messicks is correct with the total weight, but only LBrown cuts his lawn with the loader and backhoe attached
.It's approx. 1800 lbs for the tractor and MMM.
MacTractor
Silver Member
I have a BX25 with a 54" MMM, Bro-Tek Thumb and Skidplate and with everything mounted with almost full fuel, the total weight was just over 3100 pounds. I weighed it at a truck scale on the trailer. I have had the trailer weighed before empty when taking items to the landfill.
I also mow the lawn with everything attached. I can't be bothered to take it off to mow the lawn. No problems and very little in the way of tire marks.
Cheers,
I also mow the lawn with everything attached. I can't be bothered to take it off to mow the lawn. No problems and very little in the way of tire marks.
Cheers,
Renob
Gold Member
I stand corrected..............MacTractor & LBrown.....................but, I know if I mowed my lawn with everything attached there would be nothing left of the pool, fence, dog kennel, garage, house, landscaping etc.....etc.........etc...........
kubota killa
New member
Why does my bx 25 have a hard time going up hill in reverse
My BX2360 does, too, if in "Rabbit" and the hill is steep. In "Turtle, 4wd" it climbs almost anything, forward or backward.
Bruce
Code54
Elite Member
- Joined
- Aug 20, 2005
- Messages
- 4,313
- Location
- Putnam Co. West Virginia
- Tractor
- Kubota MX5100, Kubota BX25D,1957 Farmall Cub Lo-Boy Kubota KX91-3, BCS 853
In low it should not be an issue at all. I commonly climb very steep hills (the kind where the backhoe drags when you go to go up it) in forward and reverse without any issues. If you are in low range and having problems you may want to make sure the brakes are not staying engaged.
