BX22 Owners Help

   / BX22 Owners Help
  • Thread Starter
#11  
Junkman: I tried the red quick coupler after relaxing all motions and it was very easy comming apart and back together. It sounds like one of them must not have been seated good and was blocking the flow. I've also had some difficulty making connections due to temperature differences and expanded fluid.(not yet with the BX) If you can't get them together, you can relieve the pressure in the line by smacking the male end on something to depress the check and release some oil. Just becareful doing this because the oil will have some pressure behind it!
Thanks for trying the dump for me. If it was only the quick dump that put air into the system, I'd just defeat it again, but doing that didn't help because it does it in the regular dump also. Now that the quick couplers have been hashed out, could we get back to my problem in the first post? Could I get some of you other guys to try this for me? I would greatly appreciate it. I'd like to get some other results to show the dealer that this isn't "normal".
Kim
 
   / BX22 Owners Help
  • Thread Starter
#12  
Daryl: I know abou the regenerative quick dump position on the valve. I disabled it on my BX for a time by cutting a piece of pvc pipe the correct length and slipping it over the spool so the lever would stop before it got to that position. That didn't help my problem because it does it in the regular dump position also. Sometimes I think it may be worse even.
Kim
 

Tractor & Equipment Auctions

1275 (A50490)
1275 (A50490)
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A52377)
2019 Allmand...
2018 MDB T5E MDB DISC MOWER (A51247)
2018 MDB T5E MDB...
UNUSED PE Industrial Stretch Wrap Rolls (A53117)
UNUSED PE...
2015 FORD F250 SUPER DUTY EXT. CAB (A53843)
2015 FORD F250...
2015 FORD E350 16FT BOX TRUCK (A54607)
2015 FORD E350...
 
Top