BX23 seat problem

[Junkman]

If you feel that the seat is defective, compare the look of it with a new BX at the dealers. If they all look alike, then that is the way they are manufactured and there is nothing that you can do about it. If they are different, then ask the dealer to replace it for you. It is easy enough to remove the seat covering from the shell by pulling the trim off the edge and checking the foam underneath. If it is missing foam, then it is defective.

 

[escavader]

Just wondering,at my work in a lumber mill we haul two stacks [high] of lumber ,at a time,with our large JCB forklifts.We of course have to constantly back up ,which not only breaks your back,but wears the seats out quickly.Could this seat problem come from rear attatchments,such as snow blowers etc,and having your butt twisted around,so you can see what your doing?
ESCAVADER

 

[Stef]

escavader

Good point, but my seat's like that since last summer before the installation of the snow blower. I've only used the back hoe as rear implement at that time. /forums/images/graemlins/confused.gif

Thanks