BX24 Hydraulic couplers
- Thread starter Inky05
- Start date
- Views: 2055
-
- Tags
- kubota bx24
radioman
Super Member
its a snaptite brand couplers. You are not gonna find it at your local TSC store if you are asking- I checked. MY local hydraulic shop told me he can get matching sets that would be cheaper but I am hesitant to use anything else but snaptite.
Now for the next questions...
I want to add T & T on the BX24. I am assuming I can use a two spool tandem center Joystick valve(like a Loader valve). Use a hose with a female coupling for the "P" port and a hose with a male coupler on the "T" port and connect them where I would connect the BH hoses... since the BH won't be on when I'm using the T & T. A & B of one spool to the Toplink and A & B of the other to the tilt cylinder.
Is this correct?
If I use a loader valve, which cylinder (if any) should have the "float" ?
I want to add T & T on the BX24. I am assuming I can use a two spool tandem center Joystick valve(like a Loader valve). Use a hose with a female coupling for the "P" port and a hose with a male coupler on the "T" port and connect them where I would connect the BH hoses... since the BH won't be on when I'm using the T & T. A & B of one spool to the Toplink and A & B of the other to the tilt cylinder.
Is this correct?
If I use a loader valve, which cylinder (if any) should have the "float" ?
keyman1808
Platinum Member
Inky let me know if you go the route of the BH hoses. I've been thinking about doing that exact same thing just haven't acted on it yet.