Canopy BX24 Sunshade or Canopy

[Rockyridge]

Made my own for BX2350 and F2880 for about $25. Look like I made them myself but they work. Used 1 !/2" PVC.

Simple but effective, I like that.

What are the cords for?

 

[C6rider]

I have a Tuff Top on my BX24 and like it a lot. It is easily removeable or, as I do, you can just fold it down against the rops and then tilt the rops to fit in the garage. I have run into a couple trees and it bends and just snaps back. If you need to go into the woods just remove it in 30 seconds. As far as snow load I don't know but I've had snow fall off wires and trees and when they hit the canopy it really wakes you up. Better than falling on my head.

 

[Barryh]

Made my own for BX2350 and F2880 for about $25. Look like I made them myself but they work. Used 1 !/2" PVC.

I did too... protects against falling limbs and works like a charm.

 

[Westendorf-RR]

Your canopy choice may depend on where you park your BX24. If you have to fold your ROPS, or the ROPS with canopy won't clear the door header, you'll want to forget "permanent" canopies. Otherwise, many on TBN prefer the rigid type for their indestructability.

For me, being easy to remove/install was a necessity. My canopy is a warm weather sunshade. I don't use it in the woods, or off-season. Plus, I wanted it to be forgiving when I bumped tree limbs while mowing. My Tuff-Top meets all my canopy requirements.

Patented Easy-Off bracket allows quick removal -without tools for this situation you describe.

http://www.loaders.com/userdocs/products/36_WindowsMedia_-_DSL.wmv