C-40 Loader
- Thread starter viking
- Start date
- Views: 4265
markie61
Veteran Member
- Joined
- Mar 31, 2001
- Messages
- 1,362
- Location
- Northern Virginia
- Tractor
- 2019 Rural King RK55HC with Loader & Backhoe; 2001 New Holland TC40D with Loader
MUCH better /forums/images/graemlins/cool.gif
I assume the joystick no longer hits the throttle....
Mark
I assume the joystick no longer hits the throttle....
Mark
SnowRidge
Elite Member
</font><font color="blue" class="small">( I assume the joystick no longer hits the throttle.... )</font>
It never did, for anyone who took the time to loosen the lock nut and adjust the stick's position.
SnowRidge
It never did, for anyone who took the time to loosen the lock nut and adjust the stick's position.
SnowRidge
SnowRidge
Elite Member
Dave, do you know if the hoses were lengthened with the mount redesign?
SnowRidge
SnowRidge
markie61
Veteran Member
- Joined
- Mar 31, 2001
- Messages
- 1,362
- Location
- Northern Virginia
- Tractor
- 2019 Rural King RK55HC with Loader & Backhoe; 2001 New Holland TC40D with Loader
</font><font color="blue" class="small">( loosen the lock nut and adjust the stick's position)</font>
Aaahhh! /forums/images/graemlins/smile.gif I never knew you could do that. The dealer who I shopped didn't know that either. I'm glad there is an easy fix.
Jonathon/19thVA, did you ever try this solution for yours? I remembered seeing your pictures in this thread which had its last post saying you were going to try it....
Jus' wonderin'...
Mark
Aaahhh! /forums/images/graemlins/smile.gif I never knew you could do that. The dealer who I shopped didn't know that either. I'm glad there is an easy fix.
Jonathon/19thVA, did you ever try this solution for yours? I remembered seeing your pictures in this thread which had its last post saying you were going to try it....
Jus' wonderin'...
Mark
DavesTractor
Elite Member
SnowRidge, I think the hoses are the same, but I'll have to measure them.
DavesTractor
Elite Member
joshej, I assume they will have the change soon as well, but Chipperman would be best to answer this due to his affiliation with Century. The old mount works fine as well, this is just a little better.
19th_VA
Gold Member
No, I never did. It's not that much of a problem that it was worth it to me to fix. The new system is more of an improvement because of its overall location, it looks like to me. The current joystick requires a bit too much of a reach for short folks like me (5'8"). Now tall people, it looks like, might bonk their knees on it! Just goes to show, engineering is not as easy as it might seem.
Pacesetter300
Silver Member
WOW! That is much better!! One thing I like about Century/Branson is there is no reluctance to correct problems or even annoyances (as in this case) as they arise!
Pacesetter
Pacesetter
