Caroni TM1900 with Smooth-Cut Blades
- Thread starter nunyabinis
- Start date
- Views: 10814
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
swampvol ,
Which way does the shaft rotate, forward or reverse. Are you talking cutting grass? If you get into tall thick stuff, it will matter. You can test the other direction by putting the tractor in reverse, and the flail will cut just the opposite when the tractor is going forward, but that is assuming that the big roller is up off the ground, so as not to compress the material. I really don't know which is the preferred way, and most people don't realize which way the shaft is turning. It just turns the way the manufacture set it up to run, except for the units that can be switched from forward cut to reverse cut.
Which way does the shaft rotate, forward or reverse. Are you talking cutting grass? If you get into tall thick stuff, it will matter. You can test the other direction by putting the tractor in reverse, and the flail will cut just the opposite when the tractor is going forward, but that is assuming that the big roller is up off the ground, so as not to compress the material. I really don't know which is the preferred way, and most people don't realize which way the shaft is turning. It just turns the way the manufacture set it up to run, except for the units that can be switched from forward cut to reverse cut.
