Carry All Mainer Version

[motocephalic]

I finally got to make a carry all that I have been hemming all about. I ended up using wood for the removable sides, 1.5 tubing for the rear stakes and 2X10 for the body. Overall I think it will work out well, mostly using it for wood both cut and 4' length, thus the stakes in the back. It weighs more than I expected, and full of wood I suspect it will be near capacity. I can feel it 1/2 loaded already. I have about 300.00 dollars into it and about 1.5 days of work. I had a great time doing it, which made it a deal for me, except for it being so cold. I am not getting used to this cold in Maine. It will be my first in 25 years. I went through 2 propane tanks trying to keep warm.

 

[hr3]

Not that I'm insulted but why did you call it "Mainer Version"

 

[motocephalic]

my own little twist using metal in the corners, kinda rustic design and over engineered.

 

[3930dave]

My Dad would have said "You can get a good jag of wood on there !". Esp. with hardwood, that will add up.

Nice build quality, and will be a good ballast for the FEL, if you don't have another one already.

Cold - layer up, and buy really good long johns (top and bottom) to start. Eddie Bauer is my favourite. Easy for time to fly on a build project - remember to keep eating healthy snacks as you work - everybody burns more calories in the Cold. I also typically wear a good winter vest, under my coat.

Rgds, D.

 

[hr3]

A Mainer version should look more like this,, and if you look in the background you will see a blue tarp covering the end of a building,,

 

[Texomahog]

Well done. I may be building a box for my carry all today, if, I get some other chores finished. I like the removeable sides idea. I may borrow that from you.

 

[Katahdin]

I agree, it appears to be much too well constructed to be made by a local. Try it again but only put $30 into it and let us know how it comes out. You can use materials from the dump.

 

[PHPaul]

Yup, MUCH too fancy. Ya gotta use a couple of old pallets, bed iron, chicken wire, some duct tape and at least one Maine State Flag (blue tarp)

 

[motocephalic]

that's a hoot, never realized the state flag colors

 

[motocephalic]

I've been away for a long time, I've got to relearn a few things yet.

I agree, it appears to be much too well constructed to be made by a local. Try it again but only put $30 into it and let us know how it comes out. You can use materials from the dump.