Carry All

   / Carry All #1  

theboman

Veteran Member
Joined
Jun 26, 2001
Messages
1,588
Location
Grayson, KY
Tractor
Kubota B7500 HST
I picked up a carry all on 7/12/02 and wonder what you folks used to make a floor? Treated 2x ? Treated 1X ? Marine/Exterior plywood? Steel mesh?
 
   / Carry All #2  
A free pallet from somewhere /w3tcompact/icons/smile.gif
 
   / Carry All #3  
Right Gary. I wouldn't get to carried away with it. My carryall just has a few scraps of 2 x 12 bolted to it. Sometimes, I take them off and use the prongs as a forklift. (not recommended by Leinbach, by the way).
 
   / Carry All #4  
Is your carry all a KK? Are your "forks" spaced to fit under a pallet? Any pictures?
 
   / Carry All #5  
KK? It's a Leinbach. It is just a 3pt hookup w/ to prongs of angle iron. It's not the most rugged thing I have ever seen, but it great for lifting a riding mower to change the blades!(put a block of wood under it before you climb under).
 
   / Carry All #6  
Bo,

I thought of all those answers before I picked up a good sturdy pallet (free /w3tcompact/icons/smile.gif) at my Kubota dealer. Look for one that has the slots in the side that the carry-all arms can slide into. Works great!
 
   / Carry All
  • Thread Starter
#7  
Thanks to all. I'm not pretty and almost sure that I'll go with treated 2x lumber. It'll last forever and looks neater.
Thanks!
Bo
 
 

Tractor & Equipment Auctions

2024 Wanco WCTS-SM4A-730 800W Solar Integrator Trailer (A51691)
2024 Wanco...
2015 Ford Focus Hatchback (A55853)
2015 Ford Focus...
2022 Ford Maverick Crew Cab AWD Pickup Truck (A50323)
2022 Ford Maverick...
Pallet of 10 Vehicle Rims and Miscellaneous Parts (A53425)
Pallet of 10...
CUTTING TORCH STAND W/HOSES & VALVES (A55745)
CUTTING TORCH...
2023 WESSEX RMX500 LOT NUMBER 44 (A53084)
2023 WESSEX RMX500...
 
Top