Carry All

   / Carry All #1  

theboman

Veteran Member
Joined
Jun 26, 2001
Messages
1,588
Location
Grayson, KY
Tractor
Kubota B7500 HST
I picked up a carry all on 7/12/02 and wonder what you folks used to make a floor? Treated 2x ? Treated 1X ? Marine/Exterior plywood? Steel mesh?
 
   / Carry All #2  
A free pallet from somewhere /w3tcompact/icons/smile.gif
 
   / Carry All #3  
Right Gary. I wouldn't get to carried away with it. My carryall just has a few scraps of 2 x 12 bolted to it. Sometimes, I take them off and use the prongs as a forklift. (not recommended by Leinbach, by the way).
 
   / Carry All #4  
Is your carry all a KK? Are your "forks" spaced to fit under a pallet? Any pictures?
 
   / Carry All #5  
KK? It's a Leinbach. It is just a 3pt hookup w/ to prongs of angle iron. It's not the most rugged thing I have ever seen, but it great for lifting a riding mower to change the blades!(put a block of wood under it before you climb under).
 
   / Carry All #6  
Bo,

I thought of all those answers before I picked up a good sturdy pallet (free /w3tcompact/icons/smile.gif) at my Kubota dealer. Look for one that has the slots in the side that the carry-all arms can slide into. Works great!
 
   / Carry All
  • Thread Starter
#7  
Thanks to all. I'm not pretty and almost sure that I'll go with treated 2x lumber. It'll last forever and looks neater.
Thanks!
Bo
 
 

Tractor & Equipment Auctions

2017 Rockwood Esp Pop Up Camper (A51694)
2017 Rockwood Esp...
2013 UTILITY VS2RA 53FT REEFER TRAILER (A52141)
2013 UTILITY VS2RA...
2023 54' Hooklift Dumpster 15 Cubic Yard (A53422)
2023 54' Hooklift...
2019 Kia Soul SUV (A53424)
2019 Kia Soul SUV...
2010 Hyundai Elantra Touring Sedan (A51694)
2010 Hyundai...
2025 Swict 72in Bucket Skid Steer Attachment (A53421)
2025 Swict 72in...
 
Top