gsmaneeley
Bronze Member
Could not decide on a counterbalance option. So I decided to make my own carry all. 3/8" angle iron. 4x6". Dimensions are 44" wide by2ft deep. Will post pics when I can get them off my phone. About half way done
Carry all
- Thread starter gsmaneeley
- Start date
- Views: 2578
Ed of all trades
Elite Member
Sounds like a winner. looking forward to the pics.
RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,885
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
You can get them for about $80 at TSC (old price; don't know current). The carryall is one my counterbalances, especially if filled with about 1/3 to 1/2 full of mulch. I added a pallet to bottom and some sides. Back has a folding section.Ralph
JD755
Platinum Member
Carry all. Next to a front loader one of the most versatile attachments. Last year I put one together. King Kutter frame purchased at Orscheln. Good welds and quick hitch compatible. I had spare two by six lumber so just needed bolts and nuts. Width is 40 inches because the ten foot length lumber cut in thirds is 40 inches. Board spacing is good for attaching various equipment.
