cat 1 to cat 2

[Tachdriver]

Hi again, I got a new Mihindra Cat 1 tractor - 2655 55hp. I just got a RK kutter BH with Cat 2 set up on the hitch. I also bought a Harbor freight Cat 1 quick hitch thinking this bush hog was going to be cat 1 also.

So, what is the easiest way to take my cat 1 tractor and hook it up to a cat 2 BH ? preferably with the quick hitch

 

[bcp]

We might have some better ideas with a photo of the cutter.

Bruce

 

[ovrszd]

BH usually designates a Back Hoe. But I'm guessing you are talking about a brush cutter??

Your Cat I Quick Hitch is actually Cat II at the bottom hooks. Then you use whatever bushing is required at the top link.

 

[bcp]

Cat 1 and Cat 2 lower hooks are different distance apart.

Bruce

 

[WranglerX]

Ummm.... CAT X Specs...



Probably decide what "CAT" size is QH going to be to your best advantage and modify non fitting implements (once) to fit....

Dale

 

[ovrszd]

Cat 1 and Cat 2 lower hooks are different distance apart.

Bruce

Oh Snap!!!! Forgot that part Bruce.....

 

[bcp]

If it is like this, you may be OK simply by turning the pins around to face inside.

Bruce

 

[Tachdriver]

Will this help me

Pat's Easy Change System - TractorByNet.com Store

 

[Tachdriver]

I want to keep the tractor an original cat 1 hitch.....and would like to leave the harbo freight quick hitch on too. And modify the KK bush hog to fit. Or i can take the HF QH off, and add the Pats and use my hydraulic Top link to attach to the top mower pin

Sound ok ?

 

[Tachdriver]

Pat's Easy Change System - TractorByNet.com Store

Maybe this option - Pats cat 1 to Cat 2 implements with stabilizer bar ??