Chaining rear of tractor with implement attached to 3PH?

[Soldier415]

I chain as normal to the drawbar with the tiller up. Then lower it onto blocks and strap it down with one strap.

The blocks are always with me as I use them for wheel chocks on the trailer.

What dimensions are the blocks you are using?

 

[4570Man]

I throw the strap over the lower 2 hitch arms and hook it forward so it pulls against the tires. I know that's not ideal, but it works.

 

[sidecarist]

What dimensions are the blocks you are using?

6x6x18ish they're scraps from a pole barn project.

 

[Oldpath05]

Chaining rear of tractor with implement attached to 3PH? I dont understand the question so I must not have that problem, Ayuh....

 

[Soldier415]

Chaining rear of tractor with implement attached to 3PH? I dont understand the question so I must not have that problem, Ayuh....

With an implement attached and lowered onto the trailer, the implement is in the way of where the chain would run from a clevis on the drawbar to the stake pockets

 

[Oldpath05]

So is this about chaining down a tractor to/on a trailer for transport with some sort of implement/attachment hooked on? If so, know wonder I didn't get it, I don't have a trailer, yet........

 

[newbury]

I wrap my 4 chains around the axles just inside the tires and stretch to the trailer frame and strap the implement down.