Chains....Age old question...need some advice

   / Chains....Age old question...need some advice #41  
Deereman75,
See post 20, 21 or 33 for the link to Lou’s easy one man installation thread.

I finally used this method after years of wrestling the 150 lb Euro chains on.
Still need to fiddle with adjustment to get it right [I had to customize the chains when I replaced the L with the M with R1's, so they are a bit of a ******* son deal now].
But it sure takes the physical struggle out of chaining up.
 
   / Chains....Age old question...need some advice #42  
May I comment on V bar vs studded.
Mine are DIY as I've mentioned earlier.
I had used the Euro studded for my crosses but needed to finish up with domestic V bars as that was all that I could find locally.

Well the Euros are still like new while the V bars are worn to the point that I have no more V's and I only ever drive on gravel or dirt roads.

So if the option is minimal go for Euro style!
 

Tractor & Equipment Auctions

(2) CUTTLER HAMMER 200 AMP DISCONNECT (A52708)
(2) CUTTLER HAMMER...
(3) FUEL TANKS (A52708)
(3) FUEL TANKS...
Auger Drill Bit (A56857)
Auger Drill Bit...
(4) 235/70R16 USED TIRES (A58374)
(4) 235/70R16 USED...
POLY TOTE W/ WIRE CAGE (A58374)
POLY TOTE W/ WIRE...
TARTER CREEP FEEDER (A52708)
TARTER CREEP...
 
Top