Changeable front buckets

[KentT]

Have you looked at a Power Trac? They all have Quick Attach standard on all their tractors, regardless of size, though it is a proprietary setup (can't use skidsteer attachments, as is)...

They have 20 to 40+ attachments that hook up to their frontend loader mounts -- and many of them can be hooked up in seconds, without ever leaving the seat...

Power Trac

 

[755inNY]

A word of caution for quick attach systems that adapt the FEL to skid steer implements. The adapter adds weight and moves the implement or bucket further away from the FEL arms. Probably not much of a factor for the larger CUTs but could significantly impact the lift capacity for the sub CUTs.

 

[KenVT]

I have the QA on my DX40 loader, it is the quickest changout of implements, I have ever seen, I'll attach a pic of my Forks, which is one of the most versitile attachments, from moving brush, trees, and of course, stuff on pallets.
How it works is you drive up to the implement and hook the top edge to the under side of the lip, pick up the implement and push down 2 levers, all done! But the only issue with this system is that after getting it, you will have the overwhelming urge to buy a trench bucket, grapple bucket, forks, and anything else you can think of. /forums/images/graemlins/smile.gif


Ken