Charging system help
- Thread starter truce
- Start date
- Views: 767
Fuddy1952
Elite Member
- Joined
- Apr 17, 2018
- Messages
- 3,191
- Location
- South Central Virginia
- Tractor
- 1973 Economy and 2018 John Deere 3038E
The more information imho the better. Make, model, (year if known), information on alternator, etc.
pjbci
Platinum Member
- Joined
- Feb 10, 2012
- Messages
- 780
- Location
- Summit. Ms
- Tractor
- JD 4840, Deere 5075e, 450j, Cat D4k2, Kobelco 160, Volvo EC140el, deere 310, komatsu D31px22, IH 1486, MF 135, MHF TO35
The VR on mine was located inside the hood under the tach. And iirc it had a 4 wire plug going into it. Now this was years ago but when I had my alternator rebuilt it wouldnt charge until I unplugged the VR. The alternator shop had built a self exciting/regulating one for it and forgot to tell me.
Unplug your regulator and just see if it works. Wont hurt to try.
Unplug your regulator and just see if it works. Wont hurt to try.
Massey Ferguson Industrial 31, 1973 or there abouts. The regulator has 4 wires, the alternator is new not rebuilt and has 3 wires. Battery, ground, and field. I think the current regulator is from a Ford car and since this is a diesel I don't think it will work. It has a 4 cylinder Perkins engine, the plate on the engine is unreadable but it starts with A4 xxxx. Trying to identify the engine I am guessing it is a phaser/1004 series. Am I right in assuming Diesel regulators and gasoline engine regulators are not inter-changable?
Fuddy1952
Elite Member
- Joined
- Apr 17, 2018
- Messages
- 3,191
- Location
- South Central Virginia
- Tractor
- 1973 Economy and 2018 John Deere 3038E
Db Electrical shows this as the alternator which looks like a Delco to me except with a smaller pulley (it spins faster on low rpm motor). I'd just use a Delco one wire alternator putting a small pulley on it. They're available everywhere, simple, cheap.
This particular tractor has a cable driven off the back side of the alternator to drive the tachometer so I am stuck with an external regulator. A car regulator fits the wiring harness but I am unsure if since it is a diesel if it will work.
PILOON
Super Star Member
You can obtain an electronic tachometer for reasonable $'s and probably most likely still ahead using that 3 wire alternator you now have vs rebuilding/replacing that cable driven one.
