Cheaper Idea

   / Cheaper Idea #1  

kadonte

Member
Joined
Jan 16, 2001
Messages
37
Location
Wisconsin
Tractor
New Holland 1920
Considering a hydraulic tilt for the 3 point box blade prompted me to call around to some tractor dealers. Although readily available, the prices were a little steep. As an alternative(attachment) I ordered a ram from Surplus Center and bought a cheap top link arm from Fleetr Farm. After measuring the length of travel I needed I cut the one end of the threaded pivot arm to length and welded it to the ram. Gave me the ability for hydraulic tilt via the rear block and saved a couple hundred from what the dealers quoted. All was done for under a hundred includind hoses, fittings and top links assy. Hope this helps someone out.
 

Attachments

  • 37-29082-HYDRAM.jpg
    37-29082-HYDRAM.jpg
    30 KB · Views: 455
   / Cheaper Idea #2  
Nice innovation. I hope the cylinder modification works well for you. Like your idea and much cheaper than a most setups and should work great.
 
   / Cheaper Idea #3  
Good idea. I have priced some hyd top links, $200. I may lean the way you did.
Does your cylinder have a 8" travel?
 
   / Cheaper Idea
  • Thread Starter
#4  
yes sir 8" travel and 14,726/11,044 lbs. pushpull.
 

Tractor & Equipment Auctions

2018 CATERPILLAR 299D2 XHP SKID STEER (A52705)
2018 CATERPILLAR...
2014 CATERPILLAR CT6605 SBA 6X4 DUMP TRUCK (A51406)
2014 CATERPILLAR...
2019 Chevrolet Silverado 3500HD 4x4 Crew Cab 10FT Flatbed Truck (A51692)
2019 Chevrolet...
2019 HINO 268 26FT BOX TRUCK (A53426)
2019 HINO 268 26FT...
Lift Gate (A52377)
Lift Gate (A52377)
2010 CATERPILLAR D6N LGP DOZER (A51406)
2010 CATERPILLAR...
 
Top