Checking charge pressure

   / Checking charge pressure #1  

Steiner5

Member
Joined
Aug 17, 2018
Messages
34
Tractor
Bobcat Toolcat
Does anyone know what size/type of fitting is required to connect to the charge pressure diagnostic ports on a B-series 5600?

Thanks...
 
   / Checking charge pressure #2  
Does anyone know what size/type of fitting is required to connect to the charge pressure diagnostic ports on a B-series 5600?

Thanks...
I believe they are 3/8. Flatface. Maybe easer to get a JIC flare adapter to screw in and connect to your gauge. I take it the dealer had bad news?
 
   / Checking charge pressure
  • Thread Starter
#3  
Actually I haven't had a chance to take it to the dealer yet. I just thought since I have several gauges I would see if I could connect to the diagnostic ports and compare the output pressures to what the manual says. The connectors appear to be a poppet style male connector. I measured the O.D. of the tip with calipers and the it measures .450". I have been trying to find something that shows the OD of the male tip to determine what common size they are but haven't found anything yet. The plan is to still take it to the dealer but thought having the ability to check these pressures in the future might come in handy.
 

Tractor & Equipment Auctions

2004 INTERNATIONAL 4300 BOX TRUCK (A51222)
2004 INTERNATIONAL...
2005 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2005 Big Tex 10PI...
72in Rock Bucket Skid Steer Attachment (A50322)
72in Rock Bucket...
2012 MITSUBISHI FUSO SINGLE AXLE DUMP TRUCK (A51222)
2012 MITSUBISHI...
2004 Sterling L8500 4,000 Gallon T/A Water Truck (A50323)
2004 Sterling...
2020 Cat 299D3XE Skidloader (RIDE AND DRIVE) (A50774)
2020 Cat 299D3XE...
 
Top