CK25 Delivered Today

   / CK25 Delivered Today
  • Thread Starter
#31  
Thanks Kioti John for the offer, but I do have a new copy.

Oh man I'm crossing my fingers I found the problem last night to the hour meter. I found a loose ground connection on the back of the alternator,, I have since tightened it up. Anyways before I tightened the screw up the Solenoid that goes to the hour meter was not consistent when checking with a volt meter. However after makeing sure the connection was good at the back of the alternator, I'm now getting consistant results from the voltmeter. I plan on running the tractor a hour or so tonight to see if the hour meter turns over.

Wish me luck

7mmrum
 

Attachments

  • 629016-CK25 Alt Loose.JPG
    629016-CK25 Alt Loose.JPG
    45 KB · Views: 134
   / CK25 Delivered Today #32  
</font><font color="blue" class="small">( Wish me luck )</font>
Luck!

If you have the new manual, check the INDEX section. If it doesn't have the word "transmission" then you have the first reprint in which they left out the new Index. It's very difficult to find information without it.
If you want just the new Index, e-mail me at the kiotijohn @bellsouth.net addy and I'll send it to you.
John
 

Tractor & Equipment Auctions

2025 New/Unused Wolverine Brush Cutter (A51573)
2025 New/Unused...
Vermeer BC1800A Wood Chipper (A51573)
Vermeer BC1800A...
GRADALL XL3100IV MOBILE EXCAVATOR (A51406)
GRADALL XL3100IV...
2010 L3 MEP-806B GENERATOR (A52576)
2010 L3 MEP-806B...
New/Unused AGT MX-MRT14 Mini Skid Steer Loader (A51573)
New/Unused AGT...
NEW Wolverine 72'' Skid Steer Ripper (A53002)
NEW Wolverine 72''...
 
Top