cleaning hydaulic screen

   / cleaning hydaulic screen #1  

44trxfun

Gold Member
Joined
Nov 26, 2003
Messages
469
Location
western NY
Tractor
MF GC2300
I'm doing MY first change of the hydraulic oil (dealer did the 50-hour). Before so many people posted they used brake cleaner to clean their hydraulic suction screens, I bought some fuel injector cleaner. OK to use that, do ya think?

Thanks.
 
   / cleaning hydaulic screen #2  
I used diesel. There really wasn't a whole lot to clean off. Just a few metal chips that I needed to rinse off, no sludge or any other type of residue.
 
   / cleaning hydaulic screen #3  
Carb cleaner and brake cleaner are very similar. Brake cleaner is a little nastier and will leave less residue.

Either one is great. I buy the carb cleaner 6 at a time from walmart. I love the stuff and anything that can withstand brake cleaner can withstand carb cleaner.
 
   / cleaning hydaulic screen #4  
The GC2300 manual suggests Kerosene as an option. As I have this around, I used it. Seems to work well.

skivt
 
   / cleaning hydaulic screen
  • Thread Starter
#5  
Thanks you all!
 
   / cleaning hydaulic screen #6  
I love carb cleaner too, just be sure nitrile gloves are part of your repretoire. And plenty of ventilation. Wurth company makes an aerosol rubbing alcohol type cleaner thats great for all these duties and gun cleaning and is "less" toxic.
 

Tractor & Equipment Auctions

Bad Boy Outlaw XP 61in Zero Turn Mower (A48082)
Bad Boy Outlaw XP...
2003 International 4300 Flatbed Truck w/ Liftgate - Inoperable - 7.6L DT466 Diesel Engine (A51039)
2003 International...
2016 Ford Escape 4x4 SUV (A50324)
2016 Ford Escape...
2000 Dnya RGN (A49461)
2000 Dnya RGN (A49461)
1995 OTTAWA SPOT TRUCK (A50459)
1995 OTTAWA SPOT...
Ford Super Duty 8ft. Truck Bed (A49346)
Ford Super Duty...
 
Top