lragan
Member
Ordered. Thanks
close call
- Thread starter ritchieb
- Start date
- Views: 3349
Thanks Aaron for the link . I,ll Probablly order one as well . I Just checked out Your Site, Very Impresive & most Helpfull . Mine is a Baby one YM1300D . I Also see You have Manuals as well I,ll Probablly be Needing one on service & parts as well Along with some parts for Repairs I may need to do .
Starting with the Leaking Steering knuckles on both sides that the gear oil pours out , I,m assuming Maybe just needing seals ? Thanks again. Looking forward to doing Buisiness with You. Bob
MJPetersen
Veteran Member
cowboy,
stand next to the front wheel on your tractor and push on the top of the wheel/tire. If you hear/feel a "clunk, clunk" then you probably need more than seals. unfortunately that is probably the case. You probably need some bearings too. Usually the seals go out because the bearing is loose or shot.
Mike
stand next to the front wheel on your tractor and push on the top of the wheel/tire. If you hear/feel a "clunk, clunk" then you probably need more than seals. unfortunately that is probably the case. You probably need some bearings too. Usually the seals go out because the bearing is loose or shot.
Mike
