Loader ColdWater tractor loader install

   / ColdWater tractor loader install
  • Thread Starter
#51  
Pretty sure I will be breaking stuff to until I get the hang of this.
 
   / ColdWater tractor loader install #52  
Where would a tooth bar be had? they do look nice on there!

mine came from Fredricks equipment..I had them put it on when they installed the loader..Those that are posted on E bay look a lot like the 1 I have..Mine doesn't have the pointed teeth
 
   / ColdWater tractor loader install
  • Thread Starter
#53  
Got to say started digging my pond and it's pretty much scary getting out of there with a load of dirt. It just wants to tip over and scare the crap out of me.
 
   / ColdWater tractor loader install #54  
Got to say started digging my pond and it's pretty much scary getting out of there with a load of dirt. It just wants to tip over and scare the crap out of me.

The smaller Yannies are like that. You have to stay aware of what you are driving over, weight in the bucket and angle/ slope of the ground too. I have come so close many times to tipping it over with a bucket load. I keep one hand on the lever ready to drop the bucket at a moments notice. Try and keep it as low as possible and this help greatly. I am going to make a new bucket for mine but make it narrower than it is now, the same width as the front wheels which should help heaps. Have you set your wheels to the widest position and loaded them with liquid?
 
   / ColdWater tractor loader install
  • Thread Starter
#55  
No I have not. Just flip the front rims? How do I load the tires?
 
   / ColdWater tractor loader install
  • Thread Starter
#56  
Just watched some videos on the liquid fill. That should help some
 
   / ColdWater tractor loader install #57  
Not recommended to flip the front wheels. Really doesn't help and puts additional stress on it.
 
   / ColdWater tractor loader install
  • Thread Starter
#58  
Anyway to widen the tractor if you can't flip the wheels?
 
   / ColdWater tractor loader install
  • Thread Starter
#60  
I did see that. Also anyone have any tricks to keep clay and mud from sticking in the bucket? Extra 100 pounds stuck in there each scoop and takes forever to scrape it out. Banging the bucket on a stump does nothing to remove it.
 

Tractor & Equipment Auctions

19009 (A48082)
19009 (A48082)
PLEASE VIEW ALL PICTURES!! (A50775)
PLEASE VIEW ALL...
2001 Great Plains 3N-3010P-4875 Grain Drill (A50657)
2001 Great Plains...
2005 Big Tex 10PI 16ft. T/A Utility Trailer (A49461)
2005 Big Tex 10PI...
2006 Ford F-150 Pickup Truck (A48081)
2006 Ford F-150...
Pallet Fees (A50774)
Pallet Fees (A50774)
 
Top