Combo Base frame / material handle tine attachment
- Thread starter jimgerken
- Start date
- Views: 3212
bmabe
Member
Jim,
As others have said, your work is awesome! Wish I had the knowlefge and ability to tackle some projects like these.
About the photos, do you have fluorescent lights in your garage? If so (as I suspect), that and the daylight film are the combined culprits. Other than the the yellow being washed out, the photos are excellent - especially the outdoor shots.
Barry
As others have said, your work is awesome! Wish I had the knowlefge and ability to tackle some projects like these.
About the photos, do you have fluorescent lights in your garage? If so (as I suspect), that and the daylight film are the combined culprits. Other than the the yellow being washed out, the photos are excellent - especially the outdoor shots.
Barry
Pks
Platinum Member
- Joined
- Apr 6, 2000
- Messages
- 773
- Location
- Saline, Michigan
- Tractor
- Kubota L3700SU, Cub Cadet 1430, Hustler Super-Z 66in, Vermeer 1250
The cold rolled version will give a great strength advantage over the hot rolled.
OP
jimgerken
Veteran Member
"cold-rolled stronger" Thanks, I thought that was true, but forgot where I heard it. So far so good. Unless I do something stupid and put one tine under something still in the ground, its going to work.
TonyC
Platinum Member
Re: Combo Base frame / material handle tine attach
A little late chiming in Jim but let me add my Kudos for such a terrific piece of work. You are my fabrication hero. Based on my years of experience with tractors I would estimate that the items portrayed in this thread would sell for about $12,000.00!!!
A little late chiming in Jim but let me add my Kudos for such a terrific piece of work. You are my fabrication hero. Based on my years of experience with tractors I would estimate that the items portrayed in this thread would sell for about $12,000.00!!!