Cosmetic surgery

   / Cosmetic surgery #1  

wroughtn_harv

Super Member
Joined
May 12, 2002
Messages
6,000
Location
Denison, Texas
Tractor
2013 Volvo MC85C
Sometimes somethings need enhancement. In fact there's whole industries built around this concept.

Well I got called on to do a little of that myself.

As you can see "Pete" is rather flat back where most of us have, well, a bulge or two.
 

Attachments

  • 641443-april 30 2005 002.jpg
    641443-april 30 2005 002.jpg
    79.6 KB · Views: 781
   / Cosmetic surgery
  • Thread Starter
#2  
Pete's shortcoming was a birth defect. His creator sent him out into the world with a shortage of bulging area which causes him some discomfort.

So the first thing we had to do was lay out where we were going to cut to begin the surgery. Of coure removing the rhino skin was next.
 

Attachments

  • 641448-april 30 2005 011.jpg
    641448-april 30 2005 011.jpg
    72.4 KB · Views: 570
   / Cosmetic surgery
  • Thread Starter
#3  
It isn't laser. But it's just about as slick, plasma cutting.
 

Attachments

  • 641451-april 30 2005 013.jpg
    641451-april 30 2005 013.jpg
    78.9 KB · Views: 513
   / Cosmetic surgery
  • Thread Starter
#4  
Free at last! Free at last! Them big ole boys are free at last!
 

Attachments

  • 641461-april 30 2005 019.jpg
    641461-april 30 2005 019.jpg
    71.1 KB · Views: 491
   / Cosmetic surgery
  • Thread Starter
#5  
This is the reason for the surgery.

These big boys had only two inches of clearance when the bags (air) were full. When they (air bags) were dumped the bed sat on the them.

Needless this made things awkward to say the least.

I guess we could call it too much of one while not having enough of the other. Or poor planning, well, maybe we'd better not put it quite that bluntly.
 

Attachments

  • 641463-april 30 2005 020.jpg
    641463-april 30 2005 020.jpg
    78.8 KB · Views: 499
   / Cosmetic surgery
  • Thread Starter
#6  
Here's the material to fix (enhance) the situation. Give ole Pete that bulge that separates, well, a bulge.
 

Attachments

  • 641464-april 30 2005 025.jpg
    641464-april 30 2005 025.jpg
    78.1 KB · Views: 477
   / Cosmetic surgery
  • Thread Starter
#7  
There was a lot of measurements taken. Customer's a jet mechanic and they do like measuring three times before considering cutting once.
 

Attachments

  • 641467-april 30 2005 032.jpg
    641467-april 30 2005 032.jpg
    79.6 KB · Views: 424
   / Cosmetic surgery
  • Thread Starter
#8  
First we measured the clearance with the enhancement in place and airbags up.

Then we measured it with the airbags dumped.
 

Attachments

  • 641468-april 30 2005 031.jpg
    641468-april 30 2005 031.jpg
    71.6 KB · Views: 453
   / Cosmetic surgery #9  
Looks like that problem goes back to the drawing board /forums/images/graemlins/smirk.gif. Needless to say, nice cut(s). /forums/images/graemlins/wink.gif
 
   / Cosmetic surgery
  • Thread Starter
#10  
Here's one of the bulge enhancements doing a trial fit just before the great fire.
 

Attachments

  • 641472-april 30 2005 037.jpg
    641472-april 30 2005 037.jpg
    81.9 KB · Views: 457

Tractor & Equipment Auctions

NEW Wolverine 72'' Skid Steer Sickle Bar Mower (A53002)
NEW Wolverine 72''...
2008 Isuzu NPR-HD Landscape Dump Truck (A50323)
2008 Isuzu NPR-HD...
2013 Mack GU713 T/A Vac-Con Combination Sewer Jetter Vacuum Truck (A50323)
2013 Mack GU713...
1999 International 2574 Tandem Dump Truck (RUNS)(TITLE)(LOCAL TOWNSHIP) (A50774)
1999 International...
2015 Kubota RTV-X1100C (A52748)
2015 Kubota...
(2) Flower Pots (A50121)
(2) Flower Pots...
 
Top