CT 235 will not go into 4x4(front wheel assist)

   / CT 235 will not go into 4x4(front wheel assist) #1  

Arpad

New member
Joined
Dec 4, 2021
Messages
17
Tractor
Bobcat CT235
After some maintenance being performed (rear wheel/hub reseal and new couplers), I now can’t get the front wheels into the 4x4 mode. Looking at the MX service manual, the selector arm is fairly simple looking and doesn’t appear to complicated to access.
The 4x4 mode did work after the above MX for a job I did, but wouldn’t budge the next day. The tractor is functional in 2x4 mode.
The arm feels like it is jammed in a position that it’s not supposed to be. Looks like Hyd fluid needs to be drained (again!), Roll pins removed and access plate removed to see what’s going on.
Any experience out there on this issue?
 
   / CT 235 will not go into 4x4(front wheel assist)
  • Thread Starter
#2  
Disregard all. After some gentle persuasion with a 2# framing hammer, she be working per OEM.
 
   / CT 235 will not go into 4x4(front wheel assist) #3  
I have always heard just get a bigger hammer. :D
 
   / CT 235 will not go into 4x4(front wheel assist) #4  
Disregard all. After some gentle persuasion with a 2# framing hammer, she be working per OEM.
That works :)

I always have trouble getting my Kioti *out* of 4wd until the next day after it cools down, when it pops right out easy as pie.
 

Tractor & Equipment Auctions

PEMBERTON THUMB ATTACHMENT (A47001)
PEMBERTON THUMB...
2004 Sterling L8500 4,000 Gallon T/A Water Truck (A46683)
2004 Sterling...
2006 CHIEF 46' CONTAINER CHASSIS (A43004)
2006 CHIEF 46'...
25in x 96in x 5in Steel Grate (A47809)
25in x 96in x 5in...
2020 Ford F350 DRW XL CC Crew Cab 4x4 Enclosed Service body (A45336)
2020 Ford F350 DRW...
420F BACKHOE (A47001)
420F BACKHOE (A47001)
 
Top