Cup Holder

sodamo · Jul 18, 2019

Not fancy, made from scrap on hand:
3in PVC
3/4 in PVC trim
Scrap oak
2 screws
Gray paint of wrong shade

Mounted in unused slots in front of parking brake handle

Thall303 · Jul 19, 2019

Very similar to mine and worked great.......until a Robin laid two small eggs in the nest she made of the cup holder.

neverfailyou · Jul 19, 2019

Very nice... I'll check if 4" PVC will fit as I use a larger bottle. And I'll need a a 4" plug for the bottom!

sodamo · Jul 20, 2019

Plenty of room

neverfailyou · Jul 22, 2019

Thanks for the prototyping... on my next " to do" list

sodamo · Jul 26, 2019

Borrowing from neverfailyou.
My Non cup holders.

6 in x 4 in pvc
U Bolt - https://www.amazon.com/gp/product/B000BPK8F6/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&th=1
1x1 alum angle (1 1/2x 1 maybe better
Conduit clamp straightened.
All painted black

Mounted

Hook for weedwacker etc.

EddieWalker · Jul 26, 2019

I found this at a local store in their fishing area. It's a boat caddy and if you search for them on Amazon, you'll find quite a few to choose from. I bolted it to the top of my fender and it's been sitting outside for at least ten years.

https://www.amazon.com/SEACHOICE-79...+with+storage&qid=1564179950&s=gateway&sr=8-4

Croomrider · Jul 26, 2019

I just bought an LS XR3135H and it came with a factory cup holder. Dealer said it was the first one he's seen. It is mounted to the left ROPS with U-clamps. It's very nice and will fit a 44 oz drink cup. This doesn't seem to be a model specific item, I would imagine you could order one from the parts dept. and put it on any tractor with a ROPS. I'll try to get some pics tomorrow!

neverfailyou · Jul 27, 2019

sodamo said:
Borrowing from neverfailyou.
My Non cup holders.

6 in x 4 in pvc
U Bolt - https://www.amazon.com/gp/product/B000BPK8F6/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&th=1
1x1 alum angle (1 1/2x 1 maybe better
Conduit clamp straightened.
All painted black

View attachment 614555
Mounted
View attachment 614556

Hook for weedwacker etc.
View attachment 614557

Great idea...gotta love how ideas are community engineered with elegant and simple solutions .. now to figure brackets and a scarbard for a chain saw carry!