Custom HD Tractor Canopy

[Hollow]

Painted and going back together!

If you don't have an overhead crane string a chain between two trees and make one...

After only a few dozen expletives and a thrown tool or two (JK) the bumper is back on! When I did the finish welding it warped and nothing lined up! :mur:

Tadaaaaa......!

Now to mount the lights!

 

[Soundguy]

hey now.. the string crane is cheating!

yer suposed to chain a 3pt boom pole into yer loader bucket for more reach then lift it up there..

 

[Hollow]

hey now.. the string crane is cheating!

yer suposed to chain a 3pt boom pole into yer loader bucket for more reach then lift it up there..

That looks like it would work to well for me.

 

[mjncad]

No crane and no large trees...I'm screwed.

 

[Soundguy]

No crane and no large trees...I'm screwed.

i had no tree's either.. thus I cheated!

 

[Hollow]

I mounted the tool box today that I had forgot about ordering until UPS came up my drive! No trees were involved...

 

[Soundguy]

keeps getting better every day!

 

[murphy1244]

Is it loud under there? Looks like it could sound like a kettle drum with a downpour.

 

[Hollow]

Is it loud under there? Looks like it could sound like a kettle drum with a downpour.

That's one reason I went with 14ga sheet metal, I figured the thicker material wouldn't rattle so much. It's not any louder but it sounds a whole lot different. Before the tractor didn't really sound like a diesel at all, just a real deep exhaust noise. Now it sounds like an old cummins engine. I can hear the distinct diesel chatter of the valves with a raspy engine noise... I like!

 

[Gary Fowler]

I like your saying, mine was alway, "If you dont have time to do it right, when will you have time to do it over" A little different take on the same thing.