coobie
Super Member
- Joined
- Sep 19, 2004
- Messages
- 6,402
- Location
- S.Michigan
- Tractor
- Kubota RTV 1100c, JD 740,Kioti DK 40 with KL401 loader .
Very nice job,it looks brand new.
Rotary Cutter Cutter re-paint
- Thread starter Degolyerent
- Start date
- Views: 4481
Mike476
Veteran Member
- Joined
- Jun 6, 2010
- Messages
- 1,080
- Location
- Annapolis Valley, Nova Scotia
- Tractor
- MF 135 Z134 Continental, MF 1660 Cab
Love making old new again. Nice work!
hslogger
Platinum Member
my two cents, sure looks good. I went through a five foot mower of mine this summer. we replaced the blade bolts, replaced the bolts that hold the gearbox to the body. I had it sandblasted top and bottom, and then two coat eboxy on top of primer. They guy who blasted it does TONS of local farm gear.
I was just going to leave the bottom primed, and said No no no. He said, paint it like the top. It will save stuff from sticking and give it a much better job, so that is what we did. My mower is over thirty five years old and now as good as new and much better than a lot of stuff out there today.
I was just going to leave the bottom primed, and said No no no. He said, paint it like the top. It will save stuff from sticking and give it a much better job, so that is what we did. My mower is over thirty five years old and now as good as new and much better than a lot of stuff out there today.
An awesome Job :thumbsup: I was thinking of repainting a logging winch I just picked ,but with temps of 0 to -9 out with no heated pole barn it might have to wait until spring. (And anyway I'm dying to try it out) very nice work!