Cutting edge for NH 14LA loader bucket.

[ranger13256]

I am looking for a cutting edge for my NH 14LA QR loader bucket on my 2005 NH TC29 DA. It is 68" wide and has 8 holes. Any ideas?

 

[Hughman]

I bought mine from the dealer when I bought my tractor. Don't know if they are still available but it seems like a common part that could be used across many different tractors.

 

[ranger13256]

Thanks, you would think that it is a common part, but I have been googleing and so far nothing. I have not tried the local NH dealer yet, everything is so expensive there.

 

[RjCorazza]

The bolt patterns between my Land Pride rear blade and HLA front blade are exactly the same (both 7' edges). Perhaps your bucket edge has a standard set of holes?
There are plenty of companies that sell snow plow and bucket edges that let you specify the bolt pattern.

 

[ranger13256]

Great, can you please name a few coompanies that do that. Thanks

 

[Sportsman762]

It would make sense that cutting edges would be a standard bolt pattern but they are not.
The 14LA 68" bucket uses a 716427016 cutting edge, held on by 280969 #3 plow bolts 1/2"x 1-3/4" long. The cutting edge seems to run about $450.
You might be able to get the cutting edge made by a place that makes heavy equipment cutting edges, but they are generally still pretty expensive. I am not aware of anyone offering a cutting edge for the 14LA buckets on the aftermarket.

 

[ranger13256]

Thank you, great information!